Features:
- High oxygen transfer rate,BOD easy to remove from wastewater treatment.
- Mixing and stirring applications for uniform MLSS due to fine bubbles convention.
- Dry motor with overload protector;Cable with an epoxy resin sealed water-proof cable hood; Use deep groove C3 bearing to extend life time.
- Adopting cast iron FC200 material on motor housing,pump casing and impeller.The pump is coated with Epoxy.It's better corrosive-resistant and rust-resistant than common paint.
- Adopting superior abrasion-resistant dual mechanical seals(SIC,silicon carbide material)to ensure best seal effect and reduce abrasion from sewage.It's also suitable for long term running.
Applications:
- Oxygen aeration of wastewater for wastewater treatment.
- Oxygenated for aquaculture, such as fishing farming or shrimp farming or hydroponics applications.
Operating Conditions:
- Ambient Temperature: Max.40℃
- Liquid Temperature: 0~40℃
- Continuous duty.
- It's forbidden to operate submersible ejector pump(Sub.aerator) continuously under the lowest running water level.
Specifications:
- Output: 2HP~7.5HP
- Motor protection: IP68
- Insulation: F
- Pole: 2P
- Voltage: 1phase110~240V(50Hz or 60Hz); 3phase220~440V(50 or 60HZ)
- Discharge: only 3”
- Air pipe: 1.5" ; 2"
- Rated Air: 22~100 M³/Hr
- Rated OTR:0.9~4.7 Kg-O2/Hr
- 10.Water Depth:2.5~4M