Features:
- Build-in CPU control board. The pump will turn off automatically in 30 seconds if dry-running occurs. It can protect motor from burnout.
- All-in-one booster pump unit, consisted of pump, motor,and CPU board. Heat-resistance material(Viton) for mechanical seal that can be used for hot water.
- Stable water pressure provided. During showers, the water pressure won't change frequently which might cause water sometimes hot and sometimes cold.
- Small size for space saving.
Applications:
- Water supply for bathrooms, washing machines and water heaters.
- The AEVH Series are designed for water supply and pressure boosting in residential and commercial applications.
- Water pressure boosting for barber shop, restaurant ,sprinkler systems, washing machine, residence.
- Hot water pressure boosting from solar heater.
Operating Condition:
- Ambient temperature:Max.40 degree C.
- Liquid temperature:2~90 degree C.
- Relative humidity: Max. 85%(RH).
- Clean water or other clean non-corrosive liquids without abrasives.
- Before using the pump, be sure the inlet pressure setting is lower than factory preset activation pressure.
Specification:
- Output: 0.25HP~0.5HP (0.18KW~0.37KW)
- Motor Protection/Insulation: IP54 / Insulation B
- Phase:Only single phase 1Phase 110V/220V (60Hz)
1Phase 220V~240V (50Hz) - Max. Head: 35M
- Max. Capacity: 50LPM